Pico-8 consolizing on Rpi-3 (Raspberry pi 3)

1. Make linux sd-card (Pi Os Lite 64) with "Pi imager"
   https://www.raspberrypi.com/software/
   
   
2. Enable WIFI connection with raspi-config
   
   
3. Make update 
   sudo apt update -y && apt upgrade -y
   
   
4. Install Pico-8 to Linux ~dir (i am used SSH SCP)
   
   
5. Instal Pico-8 linux dependencies
   sudo apt install libsdl2-dev pulseaudio libsdl2-2.0-0 -y
   
   
6. Make Pico-8 run script like
   cat pico-8/startpico8.sh 
   
   echo "Starting PICO-8..."
   sleep 3
   /home/pi/pico-8/pico8_64 -splore
   
   
7. Make script executable
   sudo chmod  +x startpico8.sh
   
   
8. Add script to .bashrc at end of file
   ./pico-8/startpico8.sh
   for autostart after boot
   
   
9. Use raspi-config for:  
   autologin with pi user
   audio to HDMI output